H58040
Rear Honda Four Wheel Steering Tool
H58040 - Rear-Honda-Four-Wheel-Steering-Tool
DETAIL

Rear Honda Four Wheel Steering Tool
‧After making necessary adjustments to front caster & camber, and rear camber, center the steering wheel in the straight ahead position.
‧Remove the gearbox cap bolt.
‧Install the H58040 tool into the rear steering gearbox.
‧Turn the steering wheel right or left slightly until the tool seats fully.Note: the red mark on the pin will not be visible when the tool is completely seated properly. Caution: Do not turn the steering wheel when the tool is in place or damage may result to the tool or gearbox.
‧When the alignment is completed, remove the H58040tool and replace the gearbox cap bolt.Road test vehicle for proper steering wheel alignment.